The Fire Alarm System protects MUSs from fire.
The kit contains an heat sensor and a smoke sensor for a more reliable fire detection; a Manual Call Point, Sound & Visual Alarm, and a Main Control Panel .
6x HEAT sensor with truss clamp + cable and plug (RED marked) The LF-HD-4112: Conventional type heat detector indentities fire with both rapidly rising and gradually increasing temperature. It has three levels of fixed temeprature settings to adapt itself to the local temperature of the area being protected
6x SMOKE sensor with truss clamp + cable and plug (BLACK marked): The LF-PE-4111 Conventional type Photoelectric Smoke Detector uses a specialized smoke chamber design, which could sense the presence of smoke particles produced by fast combustion or slow smoldering fire. Combinig fire algorithms stored on its memory with the special three part design of the smoke chamber and given the photo-sensor's viewing angle, the detector can effectively semse both white smoke and black smoke with virtually no false alarm.
1x Sensors Connection Cable 1x Manual Call Point + cable and plug (WHITE marked): The LF/B 10 Call point series satisfies the requirements for a manual fire alarm initiating device. With its sleek and durable design, it is easily observed yet does not hinder with building design and can be fitted along corridors, hallways and exits for easy access to operate in cases where there is a requirement for activating an alarm signal
1x Sound & Visual Alarm + cable and plug (GREEN marked) : The LF-SI/SS Audible strober and sirens are designed for maximum performance, reliability and cost effectiveness. It adopts a built-in integrated circuit, a piezoelectric sounder and high intensity strobe which when combined, produces high energy conversion efficiency for effective output of light and sound while utilizing a minimum amount of power. 1x Main Control Panel (with built-in backup battery) The Eagle 2 conventional fire alarm panel provides 2 fixed zones. With up to 32 fire detectors and unlimited call points that can be connected to every fire zones. The Eagle 2 is situated in a plastic box. The panel is easy for installation and maintenance and provides user-friendly daily operations. The panel is suitable for residential, small and middle office applications with protected area up to 1000m2. The panel is available in different language versions for the front panel.
1x Duct tape and cable ties
Weight: 12 kg