Difference between revisions of "10.3 NFI Receipt"

From UNHRD Customer Service Sales
Jump to: navigation, search
(Post Good Receipt for items to be received under WHITE STOCK balances)
Line 10: Line 10:
  
 
In case of procurement from WHITE STOCK the following steps applies:
 
In case of procurement from WHITE STOCK the following steps applies:
Physically:
+
 
• in case storage by ownership is applied, move the items from WHITE STOCK’s bins to Owner’s bins (meaning the Partner mentioned as WBS element in the Account Assignment tab of the PONF/POWM).  
+
'''Physically:'''
 +
• in case storage by ownership is applied, move the items from WHITE STOCK’s bins to Owner’s bins (meaning the Partner mentioned as WBS element in the Account Assignment tab of the PONF/POWM).
 +
 
• In case optimization of storage space is applied (items are stored based on material category rather than by Ownership), no physical transfer is required but just re-labeling of the units to show that they are not part of WHITE STOCK anymore but property of the Owner specified in the Account Assignment tab of the PONF/POWM (in case barcoding is adopted, the label will be produced by the system automatically as consequence of the step below
 
• In case optimization of storage space is applied (items are stored based on material category rather than by Ownership), no physical transfer is required but just re-labeling of the units to show that they are not part of WHITE STOCK anymore but property of the Owner specified in the Account Assignment tab of the PONF/POWM (in case barcoding is adopted, the label will be produced by the system automatically as consequence of the step below
 +
 
• In case Customs references is applied, this information does not have to be changed as the Customs status of the items does have to comply with
 
• In case Customs references is applied, this information does not have to be changed as the Customs status of the items does have to comply with
System-wise:
+
 
 +
'''System-wise:'''
 
• Create the Transfer Order that is generated after the above GR posting to complete the putaway from the ‘receiving area’ (standard incoming procedure) even if in reality the items are moved from the WS area.
 
• Create the Transfer Order that is generated after the above GR posting to complete the putaway from the ‘receiving area’ (standard incoming procedure) even if in reality the items are moved from the WS area.
  

Revision as of 10:53, 3 November 2015

Post Good Receipt against PO for NFI and POWM

Post Good Receipt for items to be received under WHITE STOCK balances

Upon release of PONFs (and eventual POWMs for External Partners) which contains items available under the WHITE STOCK balances, the storekeepers have to issue the GR and produce the IR (even if the availability of WHITE STOCK covers only a portion of the total quantity procured – as in this case -). As usual, Procurement and Finance have to be informed that the GR has been issued, and signed Inspection Report have to be submitted to them and archived in the LOGISTICS files as well. When GR is posted, the Logistics officer or the storekeeper inform the SAN (Support Across the Network) unit asking for the decrease of WHITE STOCK balances accordingly with the quantity posted in the GR. To be noted that in case of procurement for external Partners, SAN unit decrease the stock only when the GR against the related POWM will be posted (meaning items will be received in WMS). The stock decrease is totally not-linked to the GR posted, meaning that it is crucial to communicate to SAN unit that the GR has been posted; When the reductions of WS figures are posted, SAN unit informs Procurement as unit responsible of the management of WS.

In case of procurement from WHITE STOCK the following steps applies:

Physically: • in case storage by ownership is applied, move the items from WHITE STOCK’s bins to Owner’s bins (meaning the Partner mentioned as WBS element in the Account Assignment tab of the PONF/POWM).

• In case optimization of storage space is applied (items are stored based on material category rather than by Ownership), no physical transfer is required but just re-labeling of the units to show that they are not part of WHITE STOCK anymore but property of the Owner specified in the Account Assignment tab of the PONF/POWM (in case barcoding is adopted, the label will be produced by the system automatically as consequence of the step below

• In case Customs references is applied, this information does not have to be changed as the Customs status of the items does have to comply with

System-wise: • Create the Transfer Order that is generated after the above GR posting to complete the putaway from the ‘receiving area’ (standard incoming procedure) even if in reality the items are moved from the WS area.

Edit and Print Inspection Report

Go to transaction MB02 or follow the patch below:

Logistics > Materials Management > Inventory Management > Material Document > MB02 – Change

IR1.png

Enter the Material Document and hit IR2.png:

IR3.png

The system displays the details of the GR posted:

IR4.png

Click on IR5.png and type in the line item number:

IR6.png

In the Text field type any required remarks:

IR7.png

Click on IR8.png Enter ZE01 as Output and EN as language:

IR9I.png

Click on IR9II.png and enter “PDF Test Printer” as logical destination and match the 2 options circled below and hit IR2.png and on IR9.png to return to previos screen:

IR10.png

Select the line Output created and click on IR11.png:

IR11I.png

Select “Send with application own transaction” as Requested processing:

IR12.png

Hit IR2.png and on IR9.png to return to previous screen and click on IR13.png twice.

Click on “Material Document” and on Process Output:

IR14.png

The system will prompt the Document number automatically; enter ZE01 in the Output Type field and 1 in the Processing Mode field and hit on IR15.png:

IR16.png

NOTE In case it is requried to reprint or resave and Inspection Report already processed, entre 3 as Processing Mode.

Select the material document and hit on IR15.png:

IR17.png

The system will return the Inspection Report form that can ebe ither saved on the computer as Adobe file or printed out on local printer after the required information have been entered:

IR18.png

Fill in the cells by entering the informtaion required to complete the printout in the editable fields (in gray) such as the delivery date, the packaging details, the weight of cargo received, observation on the materials, if any, name of who inspected the materials and date of inspection.

Hit on IR13.png to save the report and select the preferred location on local computer:

IR19.png

Browse for the desired location, change file name if required and hit on IR20.png

NOTE The C: drive of your computer is listed as 'Local Disk Y:'. Don't save the Inspections Reports on the 'Desktop' ad the one shown it is related to Citrix Server, not the desktop on user's computer.

To print the Inspection Report click on IR21.png. The system shows the default printer set on the local computer; anyother printer installed on it can be selected from the drop-down menu:

IR22.png

Select a local printer and hit on OK.

To save the Inspection Report click on List on the menu bar on the top, then on Save and File:

IR23.png

Select the preferred format (“Spreadsheet” is recommended) and hit IR24.png. Select the directory from the browse icon and chen click on Desktop and on Computer to save the INspection Report on the preferred location on the server or local disk.

Notify receipt of items to UNHRD sections and Partners