Difference between revisions of "10.3 NFI Receipt"

From UNHRD Customer Service Sales
Jump to: navigation, search
(Post Transfer Order)
Line 105: Line 105:
 
As usual, Procurement and Finance have to be informed that the GR has been issued, and signed Inspection Report have to be submitted to them and archived in the LOGISTICS files as well.
 
As usual, Procurement and Finance have to be informed that the GR has been issued, and signed Inspection Report have to be submitted to them and archived in the LOGISTICS files as well.
  
When GR is posted versus the PONF (and versus the related POWM in case of procurement for External Partners), the Logistics officer or the storekeeper informs the SAN (Support Across the Network) unit asking for the decrease of WHITE STOCK balances accordingly with the quantity posted in the GRs.  
+
When GR is posted versus the PONF (and versus the related POWM in case of procurement for External Partners), the Logistics officer or the storekeeper informs the WM Experts at Support Office asking for the decrease of WHITE STOCK balances accordingly with the quantity posted in the GRs.  
  
'''NOTE:''' In case of procurement for External Partners, SAN unit decreases the stock only when also the GR against the related POWM will be posted (meaning items will be received in WMS).
+
'''NOTE:''' In case of procurement for External Partners, WM Experts at Support Office decreases the stock only when also the GR against the related POWM will be posted (meaning items will be received in WMS).
The action posted in WINGS for stock decreasing is totally not connected to the GR posted against PONFs and eventual POWMs; for this reason is crucial to communicate to SAN unit that the GR has been posted and to monitor the related decrease of WS balances at hub level.
+
The action posted in WINGS for stock decreasing is totally not connected to the GR posted against PONFs and eventual POWMs; for this reason is crucial to communicate to WM Experts at Support Office that the GR has been posted and to monitor the related decrease of WS balances at hub level.
  
When the reductions of WS figures are posted, SAN unit informs Procurement as unit responsible of the management of WS.
+
When the reductions of WS figures are posted, WM Experts at Support Office informs Procurement as unit responsible of the management of WS.
  
 
In case of procurement from WHITE STOCK the following steps applies:
 
In case of procurement from WHITE STOCK the following steps applies:

Revision as of 11:13, 21 March 2017

NFI RECEIPT
Performer: Warehouse staff
Role: Warehouse roles
Transaction : WingsII – MIGO


Post Good Receipt against PO for NFI and POWM

Once the items received in the warehouse have been inspected and considered in line with the PONF or the POWM (in case of procurement performed by External Partner), the Good Receipt (GR) against the PO have to be posted. To post a GR follow the menu path described below:

Logistics > Material Management > Purchasing > Purchase Order > Follow-on Functions > MIGO – Goods Receipt

GR1.png


Select “Good Receipt” and Purchase order” as document to post:

GR2.png

Select Movement type 101 as GR goods receipt:

GR3.png

Click on Execute.png.

In order to record information on the items and shipping documents, edit the header text of the GR to include information such us the chassis of a vehicle, serial numbers of generators, or lot/batch number from supplier in case of perishable items (use the Header Text field as circled in green in the printshot below); this field can be also used to record any other relevant information on the incoming. In case of GR vs a POWM issued to mirror a PONF (i.e. procurement of items for External partner), it is strictly required to record the PONF of reference in the Header section of the GR (use the Delivery Note field as circled in light-blue in the printshot below); also the supplier shipping document number can be recorded (use the Bill of Lading field as circled in orange in the printshot below).

GR17.png

Above data is carried over by the system in the Inspection report that is generated from the GR as detailed in Paragraph 3. of this Chapter. Such information are also returned on the Material Document List report (transaction MB59):

GR18.png

Select the line item that requires to be GRed by clicking on the “next item ” and “previous item” icons on the bottom of the Detail Data side of the page:

GR4.png

Adjust quantity if required by clicking on the tab Quantity:

GR5.png

Click on “Item Ok “match box the bottom side of page per ea of the line items that requires GR posted:

GR6.png


Enter the Storage Location '0002':

GR7.png

HINTS In case the items received are subject to the return upon LOAN/BORROWING process, enter '0003 in the Storage location field.

The system generates batches automatically for those items that are subject to Batch Management. Never replace the progressive number provided as batch with any other information related to the incoming which can be conversely recorded during putaway stage

Check the document by clicking on GR8.png on the top of the page; if the system will return the message GR9.png click on 1.2.2 15.png to Save the Good receipt.

HINTS: Selecting the Individual Slip with Inspection text box on the Header Data side the system will automatically generate the Inspection report (see manual named How to print out the Inspection Report:

GR10.png


Reverse a Good Receipt

In case it is required to reverse a Good Receipt (e.g. to adjust posting date) follow all the above steps and use Movement type 102:

GR11.png

Click on “Item Ok “match box the bottom side of page per ea of the line items that requires GR reversal (also partial reverse is allowed):

GR12.png

NOTE: If the barcoding system is adopted in the warehouse, remove the Special Movement indicator in the WMS tab:

GR13.png

Check the document by clicking on GR8.png on the top of the page; if the system will return the message GR9.png click on 1.2.2 15.png to Save the Good receipt reversed.


The PO will show then the following movements in the History tab:

GR14.png

In order to clear the warehouse storage bin, it is required to post a Transfer Order (transaction LT10) to return the materials from their locations to the receiving area (namely 902 against the PO number); these below the movements that put away the materials after first GRN and the second one the returned the materials from the location to the receiving area:

GR15.png

After that the GRN to receive the materials can be re-posted; the system will then return the following history:

GR16.png

Post Good Receipt for items to be received under WHITE STOCK balances

When release is posted against PONFs which contains items available under the WHITE STOCK balances (and when POWMs is created and released to mirror tne PONFs in case of procurement for External Partners), the storekeepers have to issue the GR and produce the IR. Partial GR must be posted if availability of WHITE STOCK covers only a portion of the total quantity procured).

As usual, Procurement and Finance have to be informed that the GR has been issued, and signed Inspection Report have to be submitted to them and archived in the LOGISTICS files as well.

When GR is posted versus the PONF (and versus the related POWM in case of procurement for External Partners), the Logistics officer or the storekeeper informs the WM Experts at Support Office asking for the decrease of WHITE STOCK balances accordingly with the quantity posted in the GRs.

NOTE: In case of procurement for External Partners, WM Experts at Support Office decreases the stock only when also the GR against the related POWM will be posted (meaning items will be received in WMS). The action posted in WINGS for stock decreasing is totally not connected to the GR posted against PONFs and eventual POWMs; for this reason is crucial to communicate to WM Experts at Support Office that the GR has been posted and to monitor the related decrease of WS balances at hub level.

When the reductions of WS figures are posted, WM Experts at Support Office informs Procurement as unit responsible of the management of WS.

In case of procurement from WHITE STOCK the following steps applies:

System-wise:

• Post the GR against PONF that procures the items stored under WHITE STOCK (clear instructions of this action is usually entered by Procurement Unit in the PO text fields or header). This action has to be performed when the PO is released

• In case of procurement for external Partner, create a POWM by mirroring information on the PONF and post the GR

• Inform the SAN unit to decrease the the stock balance of WS accordingly

• SAN unit checks that all the above actions have been performed accurately (e.g. POWM prices are alike those on the PONF, material adopted are in line with PONF, etc.) and posts the decrease by attaching the request received from the involved hub.

• Storekeepers at hub level create the Transfer Order that is generated after the above GR posting(s) to complete the putaway from the ‘receiving area’ (standard incoming procedure) even if in reality the items are not moved from the WS area

Balance negative quantities after WHITE STOCK decrease

Storekeepers at hub level also balance the negative quantities generate by WHITE STOCK decrease posted by SAN by performing the following actions:

1. run transaction LX03 and list negative balances on the top by sorting the list by quantity (column named 'Stock'); by apply a filter in the material column to select the material codes that shown negative balances (negative balances are always twinned with positive balances of same quantity and/or batch):

Negative.png

2. Open a new session and run transaction LT01 to enter the specs circled below (NOTE: use correct BATCH and WBS that requires to be cleared) and click on WMSB 7.png:

Negative1.png

3. Enter the specs circled below: positive quantities have to balance the negative quantities; it means that information on section ‘From’ has to be related to the positive quantities (circled in red below) while those in the section ‘Destination’ has to be related to negative quantities (circled in green below) and click WMSB 7.png twice and save:

Negative2.png

The data highlighted above is retrieved by displaying transaction LX03 as shown below:

Negative3.png

NOTE: in case the negative and positive quantities are in the same storage location, insert the same info in the ‘From’ and ‘Destination’ sections and enter each respective QUANTS that can be retrieved by clicking on the storage bin from transaction LX03 view. 4. The system prompts with a warning message asking to check the data. Save the Transfer Order and confirm it thru transaction LT12, if confirmation during TO creation is not allowed. To check if the system has clean the balance, refresh transaction LX03:

Negative4.png

Physically:

• in case storage by ownership is applied in the warehouse, when GR is posted move the items from bins dedicated for storage of WHITE STOCK’s items to Partners’ bins.

• In case optimization of storage space is applied (items are stored based on material category rather than by Ownership), no physical transfer is required but just re-labeling of the units to show that they are not part of WHITE STOCK anymore but property of the Owner specified in the Account Assignment tab of the PONF/POWM (in case barcoding is adopted, the label will be produced by the system automatically as consequence of the step below

• In case Customs references is applied, this information does not have to be changed as the Customs status of the items does have to comply with

Edit and Print Inspection Report

Go to transaction MB02 or follow the patch below:

Logistics > Materials Management > Inventory Management > Material Document > MB02 – Change

IR1.png

Enter the Material Document and hit IR2.png:

IR3.png

The system displays the details of the GR posted:

IR4.png

Click on IR5.png and type in the line item number:

IR6.png

In the Text field type any required remarks:

IR7.png

Click on IR8.png Enter ZE01 as Output and EN as language:

IR9I.png

Click on IR9II.png and enter “PDF Test Printer” as logical destination and match the 2 options circled below and hit IR2.png and on IR9.png to return to previos screen:

IR10.png

Select the line Output created and click on IR11.png:

IR11I.png

Select “Send with application own transaction” as Requested processing:

IR12.png

Hit IR2.png and on IR9.png to return to previous screen and click on IR13.png twice.

Click on “Material Document” and on Process Output:

IR14.png

The system will prompt the Document number automatically; enter ZE01 in the Output Type field and 1 in the Processing Mode field and hit on IR15.png:

IR16.png

NOTE In case it is requried to reprint or resave and Inspection Report already processed, entre 3 as Processing Mode.

Select the material document and hit on IR15.png:

IR17.png

The system will return the Inspection Report form that can ebe ither saved on the computer as Adobe file or printed out on local printer after the required information have been entered:

IR18.png

Fill in the cells by entering the informtaion required to complete the printout in the editable fields (in gray) such as the delivery date, the packaging details, the weight of cargo received, observation on the materials, if any, name of who inspected the materials and date of inspection.

Hit on IR13.png to save the report and select the preferred location on local computer:

IR19.png

Browse for the desired location, change file name if required and hit on IR20.png

NOTE The C: drive of your computer is listed as 'Local Disk Y:'. Don't save the Inspections Reports on the 'Desktop' ad the one shown it is related to Citrix Server, not the desktop on user's computer.

To print the Inspection Report click on IR21.png. The system shows the default printer set on the local computer; anyother printer installed on it can be selected from the drop-down menu:

IR22.png

Select a local printer and hit on OK.

To save the Inspection Report click on List on the menu bar on the top, then on Save and File:

IR23.png

Select the preferred format (“Spreadsheet” is recommended) and hit IR24.png. Select the directory from the browse icon and chen click on Desktop and on Computer to save the Inspection Report on the preferred location on the server or local disk.

Warehouse staff informs Customer Service about receipt of items so that UNHRD Partners are notified as well.

Post Transfer Order

After the posting of GR against PONFs (with Q as account assignment) and POWMs, the system moves the user directly to the creation of Transfer Order to perform the putaway of the materials received. Click on WMSB 7.png:

TO1.png

The system displays the GR lines for the materials that require to be put away in the warehouse:

TO2.png

Click on TO3.png:

TO4.png

Click on TO5.png:


TO6.png

In the Certificate No. field enter any extra information about incoming items (e.g. for batch or lot number related to Food or Medical items) and tick the Confirm box. In case the system does not allow the confirmation during posting of Transfer Order, this action can be completed with a separate posting after TO creation. The systems shows as Source data the receiving area which correspond to Storage Location 902 and adopts the PO number as storage bin. The system proposes the information on Destination data starting from the putaway strategy recorded in the material master database for each material; any other Storage Type and/or Storage Bin can be selected in the Destination section if different than what is foreseen by the strategy:

TO7.png

Click on WMSB 7.png

It is required to check the information entered. Click again on WMSB 7.png as many times as needed.

Click on TO8.png on to process next line item, if any:

TO9.png

Complete the entries as above for all the remaining line items and confirm by clicking on WMSB 7.png. Click on WMSB 7.png as many times as needed.

Click on TO8.png to make sure there are no more items to be selected. The system displays the screen below when all the items have been processed:


In case it is required to insert any extra information about incoming items (e.g. for batch of lot number related to Food or Medical items) once transfer order is already posted against GR, go to transaction LT01 or follow the path below:

Logistics > Logistics Execution > Internal Whse Processes > Stock Transfer > Create Transfer Order >

TO10.png

Click on IR13.png to save.

NOTE In case of segrgation of duties between who post the GR and how process the putaway, the transfer order against a GR can be posted on a separate stage by running transaction LT06 or following the path below:

Logistics > Logistics Execution > Inbound Process > Goods Receipt for Purchase Order, Order, > Putaway > Create Transfer Order

Enter the GR number generated from previous posting and follow above instructions on how to complete the putaway process.


Confirmation of Transfer Order

If confirmation is not allows when Transfer Order is created go to transaction LT12 or follow the path below:

Logistics > Sales and Distribution > Shipping and Transportation > Picking > Confirm Transfer Order > Single Document

Enter the TO number and click on WMSB 7.png. The system displays the list of items processed thru the TO just created:

TO11.png

Click on TO12.png and on IR13.png to save.


Posting of Transfer Order for warehouse internal move

In case the wrong destination bin has been entered in the Transfer Order or in case it is required to change items location, go to transaction LT01 or follow the path below:

Logistics > Logistics Execution > Internal Whse Processes > Stock Transfer > Create Transfer Order

Open a new WINGS section to take note of the actual location of items:

LT011.png

On the first screen of the Transfer order creation enter the information circled in red in the image below:

LT012.png

NOTE The vendor batch number can be inserted in the Certificate n. field (circled in blue).

On the next screen enter the information circled in red below regarding the source and the destination bin:

LT012.png

In case it is only required to edit/amend the certificate n. field enter the same information on both the source and the destination bin:

LT013.png

Click on 1.5 1.png and save.